HOME >Tire Recycling Production Line

Tire Recycling Production Line

1. Tires Circle Cutter
Cut open the joint of the tire’s side and top.

Name	Motor power	Weight	Capacity	Tire specification
Tire circle cutter	4kw	650kg	40pcs/h	650-1200mm (Both reinforced and nylon tires)

2. Tire Strip Cutter
Cut the circle of the tire into 5-8cm strips.

Name	Motor power	Weight	Capacity	Cutting size
Tire strip cutter	4kw	850kg	2.5t/h	5x8cm

3. Tires Slice Cutter
Cut the strips into chunks about 3.5 cubic centimeters.

Name	Motor power	Weight	Capacity	Cutting size
Tire slice cutter	4kw	800kg	0.8t/h	3x5x8cm

4. Rims Separator
Make the steel rims and the rubber on the mouth of tire separated.

Name	Motor power	Weight	Capacity
Rims separator	7.5kw	1300kg	100pcs/h

5. Rubber Crusher (Host Equipment)
This rubber crusher is designed to crush the waste tire into rubber powder/particals. Features of Hongrun rubber crusher:

Environmental protection, good application prospects;

Small size and energy saving. To recycle 1 ton rubber powder, it needs power 250-280 kWh with traditional rubber crusher. However it only consume 150-180 kWh with Hongrun energy saving rubber recycling machine. That is because the bearings used on the machines are different, normal one is sliding friction, but ours are rolling friction!

Large capactiy, Capacity rubber crusher is also higher than normal ones on the market.

High output, power saving! You can buy another rubber production line with the money you saved on the power.

Model	Capaicty(T/day) 26mesh,20hours	Roller length	Front roll linear speed	Roll speed ratio	Max roller spacing	Motor power	Remarks
350	3	300*500mm	26.2m/min	1:2.5	8mm	30kw	Antifriction bearing
400	6	400*600mm	34.5m/min	1:2.5	8mm	45kw
450	8	450*760mm	38.0m/min	1:2.5	8mm	55kw
560	10	560800mm 510800mm	38.6m/min	1:2.5	8mm	75kw
560D	20	560*800mm	42.5m/min	1:2.5	8mm	132kw