Introduction of the theoretical knowledge of waste iron crusher for large scrap steel crusher:

Metal pulverizer is used to break all kinds of metal materials. It can be used to break the metal materials into small metal particles at once, so as to facilitate the recycling of steel mills and foundries.These small metal particles not only reduce the transportation cost, but also effectively improve the quality and efficiency of the cast iron.

The company is good long independent design, production of all kinds of shredding crusher machinery.After a long and professional research, our company has developed a series of crushers.It is very important to recycle the waste metal resources and use it in the recycling project of waste resources.The products are aimed at dozens of industries including steel smelting, casting, machinery parts manufacturing, fire fighting equipment, textile and waste materials recycling industry.

     

Metal crusher working principle: all kinds of scrap metal, iron and steel in the crushing cavity can be fully and effectively finely, high output, low energy consumption, high efficiency, discharge and finely uniform. And when using the device, low noise, no pollution, simple operation, convenient maintenance, and use scrap of broken after sorting sorting system to get pure quality scrap processing method.Its working principle is the feeder scrap into the crusher operation automatically at a high speed, high torque motor driven by continuous, crusher hammer head and the blade on the rotor turns struck into the cavity scrap steel, under the strong impact, scrap torn and squeezed into a certain specification of broken steel, then through sorting equipment processing, can get high purity of high quality steel.

     

Internal components of crusher:

1. The main engine housing is made of heavy steel plate, and the inner lining is made of high manganese steel casting, which can be replaced.2. The main rotor has 11 steel plates installed on the horizontal axis, the circular distribution of the steel disk has 6 pin shafts, and the axial suspension has 10 hammer heads.3. The main shaft is supported by ball bearing bearing, the circulation oil is forced to be lubricated and cooled, and equipped with temperature sensor;4. The feeding port is equipped with a super strong double barrel feeding device. The position is high and low, and the same direction is rotated, which can gradually crush the large piece of loose material into the machine.The machine is equipped with single motor and dual motor, and the user can choose the machine configuration according to the size of the transformer.The disintegrator with dual motor is effective to reduce torque force, so as to make the crusher save energy and save energy, such as broken tank, bucket metal objects can be used by a motor to use the mechanical inertia to break up.

     

Application:

All kinds of metal materials and circuit board materials can be torn to the shape of easy treatment.It is an ideal equipment for metal smelting, metal recycling and steel enterprises.The two - axis crusher is the first choice for the crushing of brittle materials such as car debris and water resistant materials. The metal crusher is suitable for centralized treatment of cuttings at fixed locations.

     

Applicable materials:

1. Compressed flat body, body dismantling parts, etc

2. Shearing or packaging materials with no density greater than 1t/m3

3. Household appliances: such as old washing machines, refrigerators, air conditioners, colored steel tiles, etc

4. Used motorcycle, electric car, bicycle and body parts, etc

5. Discarded cans, paint buckets, aluminum waste (removing liquids, paint, etc.)

6. Scrap iron, scrap steel, scrap iron, old metal etc

     

Equipment for metal crusher:

Material - transport - main - dust - - - - - - - - - - - aluminum separation

Main engine one, nine meters conveyor one, five meters conveyor one, dust catcher one set, magnetic roller one, motor complete, operating cabinet two.It can be equipped with carbonized treatment equipment, and the cutting tools can be made of special tool steel, and the price is calculated separately

     

Performance characteristics:

1. Heavy knife, high crushing power, steel casting with alloy steel, long service life.

2. Frame plate thickness, high torque, very strong.

3. Use microcomputer (PC) to automatically control, set up, stop, reverse and overload automatic reverse control function.

4. The equipment has the characteristics of low speed, high torque, low noise and dust.

5. Easy to adjust, low maintenance cost, economic durability.

6. The thickness and number of knives can be changed according to different materials.

7. It has selective crushing effect, and the particle size of the product is more uniform.

The power is driven by the cycloidal motor. 

9. High manganese alloy hammer head, will scrap old steel completely broken.

10. Used the wheel forging hook of the used train, the hardness is not less than 55 (the HRC hardness of the file is 51 degrees).

11. Internal use of the lining board to ensure the strength of the box.

Contact us

Telephone:

008613592505674